Recently, many users have reached out to Lintratek with questions about mobile signal boosters. Here are some of the most common questions and their solutions:
Question: 1. How to Adjust the Mobile Signal Booster After Installation？
Answer:
1.Ensure the indoor antenna is far from the outdoor antenna to avoid mutual interference. Ideally, there should be a wall between the indoor antennas and outdoor antennas.
2.Install the indoor antenna at least 2 meters above the floor or mount it on the ceiling.
3.Wrap all connectors with tape to prevent water ingress and oxidation, which could reduce the indoor signal coverage.
Question: 2. Signal Improved After Installation, But Unable to Make Calls？
Answer:
1.Check if the outdoor antenna is installed correctly.
2.Ensure the location of the outdoor antenna has a stable signal and the antenna is directed towards the signal basement.
3.Ensure the length of the cable between the outdoor antenna and the booster is appropriate (preferably no more than 40 meters and no less than 10 meters).
4.If the issue persists, consider using a more powerful booster or contact customer support.
Question: 3. Poor Call Quality
Answer:
1.Adjust the direction of the outdoor antenna to point towards the signal tower as much as possible.
2.Use coaxial cables of 50 ohms-7D or higher for the outdoor antenna.
3.Ensure the distance between the outdoor and indoor antennas is sufficient (minimum 10 meters) and preferably separated by walls or staircases. Avoid installing the indoor and outdoor antennas at the same level to prevent the indoor antenna’s signal from being received by the outdoor antenna, which could cause feedback loops.
Powerful Cellular Signal Booster System
Question: 4. Stable Signal After Installation, But Limited Coverage Area
Answer:
1.Check if the signal at the location of the outdoor antenna is strong.
2.Ensure the cable from the indoor antenna to the booster is not too long, connections are secure, the cable meets specifications, and the system isn’t overloaded with too many connections.
3.Add more indoor antennas if necessary, based on the actual situation.
4.Consider using a mobile signal booster with higher output power.
If you have any further questions, feel free to leave a message, and I will get back to you as soon as possible!
Lintratek has been a professional manufacturer of mobile communication with equipment integrating R&D, production, and sales for 12 years. Signal coverage products in the field of mobile communications: mobile phone signal boosters, antennas, power splitters, couplers, etc.
Post time: Jul-19-2024