No signal in elevator？Lintratek Signal Booster can solve all weak signal trouble in major residential areas
No signal for the elevator on the 17th floor, how to solve such weak signal problems? Lintratek Signal Booster only used a set “elevator 4g lte repeater “, can solve the weak signal troubles of 4G+5G three-network communication and Internet access. Of course, Lintratek mobile signal booster can also be applied to outdoor mountains, plateaus, deserts, basements, parking lots, villas and so on.
Project Detail
| Elevator signal coverage of residential in Foshan City, Guangdong Province, China | |
| Project Location | Mingyuan Garden, Nanhai District, Foshan City |
| Coverage Area | 17 floors /1 elevator |
| Project Type | Commercial |
| Project Profile | The elevator of the real estate did not do signal coverage, and was repeatedly feedback signal problems by the owner. |
| Customer Requirement | Full elevator signal coverage, all networks signal can be work |
Now the floors of residential communities are getting higher and higher, and elevators have become a necessary means of transportation. However, the elevator signal coverage is insufficient, the signal is weak, and even the signal is lost, which has buried security risks for people who take the elevator. Therefore, the management staff of the community should improve and enhance the elevator signal coverage to ensure the safety of residents.
The project is located in Nanhai Mingyuan Garden, Foshan, covering a 17-story elevator. Due to the owner’s repeated feedback that the elevator has no signal, the management staff found the Lintratek Repeater Manufacturer to make the signal coverage.
Design Scheme
Lintratek team considering that the elevator floor is 17 floors, after our professional and technical team analysis, the use of a set of elevator treasure, you can carry out complete signal coverage of the elevator. It is “cost-effective and practical.”
The elevator is divided into two sets of equipment, the main control unit and the car unit, in simple terms: the main control unit “leads” the signal from the outdoor to the elevator shaft, and the car unit transfers the elevator signal, covering the entire elevator.
lte Repeater Scheme
This elevator can support 4G+5G three-network telephone Internet access, the three major operator networks are applicable, and rarely equipped with ALC intelligent adjustment function, can effectively prevent signal self-excitation, eliminate interference with the base station signal.
Really “5G” network speed is super fast! Developed for elevator signal coverage, once launched widely praised.
Field Installation
1. Find a place outdoors where the signal source (more than 3 grids) is good (such as the top floor), and install the receiving antenna of the main control unit here. The receiving antenna must face the signal tower.
2. Use a feeder to connect the outdoor receiving antenna to the RF_IN end of the amplifier, and the RF_OUT end of the amplifier to the indoor transmitting antenna. Check that the connection is stable.
3. Ensure that all components are connected and connectors are secured, and power on the amplifier. Then install the car unit in the same way, and the elevator signal is instantly full!
4. Signal detection
After installation, the “CellularZ” software is used again to detect the elevator signal value, and the RSRP value is increased from -127dBm to -75dBm, the enhancement effect is too strong!
After installing the elevator treasure, it can not only talk smoothly in the elevator, but also brush short videos and play games, and the coverage effect is praised by the community manager!
If your community also has signal trouble, you can leave your contact information in the background! Lintratek Signal Booster Team help you!
Post time: Nov-03-2023